Start button could be made a little more sensitive

I took a look at this, assuming that it was a leaf switch that I could easily adjust, but it's actually a microswitch. It's possible to press the button in and hear the click of the microswitch activate, but for it to not actually register.

It doesn't look like there's any kind of adjustment that can me made on the switch itself. It's likely that replacing the switch would completely address the problem, but it's also the case that you can just make sure to press the button firmly for it to register. You don't really even have to press it that firmly, but it is something that I'd noticed when installing the tilt bob that sometimes a press wouldn't register.

After another report of the start button not working, I took a closer look and found that a wire connected to the underside of the start microswitch had become detached. I reconnected it, and it seems fine now. Even light touches register without issue. It's likely that the wire was loose and only sometimes registering until it became completely disconnected.